An HWID spoofer is a program that changes the hardware identifiers Windows reports to other software, so the PC looks like a different machine. That is the whole idea. Everything else — "temp", "perm", "kernel", "undetected" — describes how a particular spoofer does it and how long the change lasts.
The part most pages skip: no spoofer changes everything. Each type reaches a different layer of the system, and some identifiers sit below anything software can honestly rewrite. Knowing which layer a tool works on tells you what it can and cannot do before you install it.
Which identifiers a spoofer deals with
"HWID" is not one number. It is a set of values that software reads and combines into a fingerprint. If you want the full list, start with what an HWID actually includes. For spoofing, the values fall into three layers:
- Windows layer. MachineGuid and a handful of related IDs in the registry, the computer name, the install and product IDs. They are created when Windows is installed and stored as ordinary registry values.
- Storage and network layer. NTFS volume serial numbers, which are written when a partition is formatted, and the MAC addresses of network adapters (Windows can change those on its own — see the MAC address changer guide).
- Firmware layer. The SMBIOS UUID, motherboard and BIOS serial numbers, the hardware serial of each drive, the CPU, and the TPM endorsement key. These are set at the factory and stored in chips, not in Windows.
A spoofer is defined by how far down this list it goes.
Three ways spoofers work
User-mode changers. They rewrite the values Windows itself stores: registry identifiers, volume serials, MAC addresses. No driver is loaded, so nothing runs in the kernel. The change is real rather than masked — after it, every program reads the new value because the new value is what is stored. The limit is the firmware layer, which a user-mode program cannot write to.
Kernel-driver spoofers. They load a driver that intercepts requests for hardware identifiers and returns fake answers. This is how a spoofer can appear to change a disk serial or SMBIOS data without touching the chip. Nothing is rewritten, so the real values come back when the driver is unloaded. The cost is a third-party driver running with the highest privileges on your system, and Windows protections such as the vulnerable driver blocklist exist specifically to stop the unsigned or abused drivers many of these tools rely on.
Firmware rewriting. Some tools flash new serials into the motherboard using manufacturer utilities. The change persists across reinstalls, but a failed write can leave a board that does not boot, and it normally voids the warranty. This is the only route to the values described in how SMBIOS stores hardware identity, and it is the riskiest of the three.
Temp spoofer vs perm spoofer
These two words describe persistence, not quality.
A temp spoofer holds its changes for one Windows session. It is almost always the kernel-driver type: reboot, the driver is gone, the original identifiers are back. It has to be started again before every session.
A perm spoofer makes changes that survive a reboot. That covers two very different things: rewriting what Windows stores (registry IDs, volume serials, MAC), and flashing firmware. Sellers rarely say which one they mean, and the difference matters — the first is reversible from a backup, the second may not be reversible at all.
So the useful question is not "temp or perm" but "which identifiers, and can I get the old ones back".
What no spoofer can honestly change
The TPM endorsement key is generated inside the chip and cannot be rewritten by software. Games that require TPM 2.0 and Secure Boot can tie a ban to it, which is why anti-cheats lean on TPM. A kernel spoofer can try to hide the TPM, but Secure Boot and measured boot are designed to expose exactly that kind of tampering.
Two more limits apply to every tool, whatever the sales page says:
- A spoofer does not lift a ban. The banned account stays banned; changing identifiers only changes what the PC reports from that point on.
- Using one to get around a game's hardware ban breaks that game's terms of service, and anti-cheat vendors actively look for spoofing.
Free HWID spoofers and what they cost
Most free spoofers are repackaged open-source projects from GitHub or files passed around Discord. Two problems come with them. They ask for administrator or kernel access, which is exactly what malware wants, and fake "spoofers" are a well-documented way to deliver password stealers. And they are abandoned quickly, so a tool that worked last year may do nothing today or break Windows activation and network settings without a way back.
Before running any spoofer, free or paid, check four things: does it say exactly which identifiers it changes, does it load a kernel driver, is the file signed by a named publisher, and does it back up the original values. The free routes that pass this check are compared in three ways to get a free HWID spoofer.
Where HWIDChanger fits
HWIDChanger is a user-mode changer. It rewrites Windows registry identifiers, NTFS volume serial numbers and the MAC addresses of physical adapters, without a kernel driver. Original values are backed up to the device's online account, so a change can be rolled back. It does not touch firmware identifiers — SMBIOS UUID, BIOS serial, CPU — and does not claim to.
That makes it the right tool when the fingerprint you need to refresh is built from the Windows, storage and network layers, and the wrong one if a game binds to TPM or motherboard serials. If the first case is yours, the steps are in the guide to changing HWID on Windows 11, and you can change the HWID on this PC once the free changes are used up.
FAQ
Is an HWID spoofer the same as an HWID changer?
In everyday use, yes — both mean software that makes a PC report different hardware identifiers. "Changer" usually refers to tools that rewrite stored values, "spoofer" to tools that fake the answers through a driver, but sellers use the words interchangeably.
Does an HWID spoofer work after a reboot?
A temp spoofer does not: the original identifiers return when the driver unloads. Changes made by a user-mode changer or by firmware rewriting persist, because the stored values themselves are different.
Can an HWID spoofer change the motherboard serial?
Only by masking it with a kernel driver for one session or by flashing the firmware. A program without a driver cannot change it, and a tool that claims otherwise is not telling the truth.
Is using an HWID spoofer illegal?
Changing identifiers on your own computer is not illegal in itself. Using it to evade a ban violates the game's terms of service and can lead to further bans.
The takeaway
An HWID spoofer changes what your PC reports about its hardware, and the type decides how deep that goes: user-mode changers rewrite Windows, storage and network identifiers, kernel spoofers fake answers for one session, firmware tools overwrite the chips at real risk. None of them rewrites a TPM key or lifts an existing ban. Pick a tool by the identifiers it names and by whether it can restore the originals — not by the word "undetected".
