HWIDChanger
Back to list
Published on November 17, 2026

MAC address changer for Windows: three built-in ways and their limits

How to change a MAC address on Windows 10 and 11 with Device Manager, PowerShell or the registry, when a dedicated MAC address changer helps, and what it cannot hide.

MAC address changer for Windows: three built-in ways and their limits

A MAC address changer is a tool that makes a network adapter report a different hardware address than the one it was built with. On Windows you do not always need a separate program for that: the system has three built-in ways to do it, and each has limits that most download pages do not mention.

This guide covers what actually changes, how to do it by hand on Windows 10 and 11, where dedicated tools help, and what no MAC changer can do.

What a MAC address changer really changes

Every network adapter has a 48-bit address written into it at the factory, for example 3C-52-82-1A-9F-04. Windows reads that value when the driver loads and then uses it for everything: the local network, DHCP, and any program that asks "which adapters does this PC have".

A MAC changer does not rewrite the chip. It tells the driver to use another address instead, and stores that instruction in the registry. From that moment Windows and ordinary software see the new value. The factory address stays in the adapter and comes back as soon as the override is removed.

That is why a MAC change is safe to try and easy to undo, and also why it has a ceiling, which is covered below.

Method 1: Device Manager

  1. Open Device Manager and expand Network adapters.
  2. Open the adapter's Properties and go to the Advanced tab.
  3. Find Network Address (some drivers call it Locally Administered Address).
  4. Select Value, type 12 hexadecimal digits without separators, and confirm.

The adapter restarts and comes up with the new address. If the property is missing, the driver does not expose it in this dialog, and you need one of the next two methods.

Method 2: PowerShell

Run PowerShell as administrator. First list the adapters with their current and factory addresses:

Get-NetAdapter | Format-List Name, MacAddress, PermanentAddress

Then set a new one:

Set-NetAdapter -Name "Ethernet" -MacAddress "02-1A-2B-3C-4D-5E"

PermanentAddress in the first command is the factory value. It does not change after spoofing, which is a useful way to see for yourself what a MAC changer does and does not touch.

Method 3: the registry

Device Manager and PowerShell both write the same registry value, and you can set it directly. Adapters live under:

HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}

Each numbered subkey (0000, 0001, …) is one adapter; DriverDesc tells you which. Create a string value named NetworkAddress with 12 hex digits, then disable and re-enable the adapter. Deleting the value restores the factory address.

Why the new MAC sometimes does not apply

  • Wi-Fi adapters. Many Wi-Fi drivers on Windows only accept a locally administered address, which means the second hex digit must be 2, 6, A or E (for example 02-… or 1A-…). Anything else is silently ignored.
  • The driver ignores the override. Some drivers, mostly for USB adapters, never read NetworkAddress.
  • You changed the wrong adapter. A laptop usually has Ethernet, Wi-Fi and Bluetooth, each with its own address.

Check the result with getmac /v or ipconfig /all.

Windows 10 and 11 also have Random hardware addresses in the Wi-Fi settings. It randomises the address per Wi-Fi network, works only for Wi-Fi, and exists for privacy on public networks rather than for a full change of the PC's identity.

When a dedicated MAC address changer helps

Free utilities such as Technitium MAC Address Changer do the same registry edit through a window: they list all adapters, generate an address and restart the adapter for you. That is convenient when you change addresses often or when Device Manager does not show the property.

What a tool adds over the manual methods is mostly bookkeeping: covering every physical adapter at once, picking an address from a real manufacturer's range instead of an obviously random one, and remembering the original values. The common myths about MAC spoofing explain why those details matter more than the change itself.

What a MAC address changer cannot do

  • It does not erase the factory address. Software that queries the adapter at a low level, as kernel-mode anti-cheat drivers can, still reads the permanent address.
  • It does not change the rest of the hardware fingerprint. The MAC is one identifier among many. Disk and volume serials, registry identifiers and firmware values stay as they were; see what an HWID actually includes.
  • It does not hide virtual adapters. VirtualBox, VMware and VPN adapters keep their own recognisable addresses, as described in how virtual network adapters affect HWID.
  • It does not lift a ban and does not change your IP address. A ban tied to an account or to other identifiers stays in place.

A new MAC can also have side effects: a router that reserves an IP by MAC will hand out a different one, and MAC filtering or an ISP binding may block the connection until you restore the original.

MAC address and HWID in one pass

If the goal is not a single address but the whole set of identifiers a PC reports, changing the MAC alone leaves the job half done. HWIDChanger changes the MAC addresses of all physical adapters together with Windows registry identifiers and NTFS volume serial numbers, without a kernel driver, and keeps the original values in the device's online account so the change can be rolled back. It does not touch firmware identifiers such as the SMBIOS UUID or the adapter's permanent address.

How this compares with other tool types is covered in the overview of HWID spoofers. When the free changes are used up, you can buy a change for this PC.

FAQ

Is changing a MAC address legal?

Changing the address on your own equipment is legal in most countries; operating systems offer it as a standard setting. Using it to get around a network's access rules or a service's terms is a different matter and can break those rules.

Does the MAC address change back after a reboot?

No. The override is stored in the registry and survives restarts. It disappears if you delete the value, reinstall the driver or reinstall Windows.

Do I need a MAC address changer on Windows 11?

Not necessarily. Device Manager, PowerShell and the registry do the same thing for free. A tool is worth it when you need all adapters changed consistently or want the originals saved.

Can a game or program still see my real MAC?

Ordinary programs see the new address. Software with a kernel driver can ask the adapter for its permanent address, which a MAC changer does not alter.

The takeaway

A MAC address changer replaces the address Windows reports for an adapter, not the one stored in the hardware. Windows can do it with Device Manager, PowerShell or one registry value; tools make it faster and more consistent across adapters. The factory address remains readable at a low level, and the MAC is only one part of a PC's fingerprint, so decide first whether you need a new address or a new set of identifiers.

Share this articleTelegramX
No ratings yet
Loading…

Related articles

Want more control over your HWID?

HWIDChanger changes your PC's hardware fingerprint in one click. Try it for free.

Free Download for Windows